컨텐츠 바로가기

이알씨몰

  • LOGIN
  • JOIN
  • MYPAGE
  • CART
  • ORDER
  • WISH LIST
검색검색


현재 위치

  1. 방제용 드론
이전상품 다음 제품 보기 확대보기

모듈 전압 조정기 Yongle UBEC-YL6S8A02 [Input 13V~28V, Output 5V/12V, 8A] (해외배송 가능상품)

기본 정보
상품명 모듈 전압 조정기 Yongle UBEC-YL6S8A02 [Input 13V~28V, Output 5V/12V, 8A]
판매가 26,200원
적립금 260원 (1%)
상품코드 P0000LPT
배송방법 택배
배송비 3,500원 (50,000원 이상 구매 시 무료)
수량 수량증가수량감소

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
모듈 전압 조정기 Yongle UBEC-YL6S8A02 [Input 13V~28V, Output 5V/12V, 8A] 수량증가 수량감소 26200 (  260)
총 상품금액(수량) : 0 (0개)

상품상세정보

Specifications:

The UBEC-YL6S8A is a switching power supply type UBEC with a continuous output current of 8A. Adopting imported high-efficiency, step-down DC-DC switch IC design, small size, light weight, large output power; shielded cover, closed magnetic power inductor and magnetic ring design to avoid electromagnetic interference; also increased battery power display function Monitor the battery power during flight to avoid significant losses due to insufficient battery power and eliminate the need to add other battery monitoring equipment.

At this moment, UBEC can obtain DC voltage suitable for the operation of receivers and other equipment from 2S-6S lithium battery pack, and stably provide up to 8A output current to power devices such as receivers, gyroscopes and multiple servos. Ideal for large fixed-wing and electric helicopters. With this device, you can get the power required by the receiver directly from the power supply, without having to have a separate receiver battery pack.



1. Product model specifications:







2, product features:

2.1, using imported buck switching power supply IC design, the efficiency is up to 90%.

2.2, while ensuring performance, the compact design, small size, light weight, only 29.5g.

2.3. Low noise design, all components are fully shielded, and closed magnetic high-power inductors are used. At the same time, the output line is equipped with a magnetic ring, which greatly reduces electromagnetic interference.

2.4, the output current is large, the continuous output current is 8A, and the peak output current is 10A, which fully guarantees the power demand of the equipment.

2.5. It has a wide range of working voltage and can work normally between 13V-28V (2S-6S Lipo) (when the input is lower than 13V, the overheating protection point is reduced, and UBEC can work).

2.6, with overheat protection, output overcurrent protection, output short circuit protection and input undervoltage protection.

2.7, output indicator, use red LED work indicator, UBEC normal working time, indicator light.

2.8, soft start switch, open or close the output of UBEC through the soft start switch.



3. How to use:

3.1, UBEC-YL12S5A01: The output voltage is 5V/6V, which can be switched, and the jumper cap is used for selection. The jumper is inserted in pin1 and pin2. The two pins are selected for 6V output. The two pins inserted in pin2 and pin3 are selected for 5V output. Please refer to the figure; if the jumper cap is lost, the default output of UBEC is 5V.

3.2, UBEC-YL6S8A02: The output voltage is 5V/12V, which can be switched, and the jumper cap is used for selection. The jumper is inserted in pin1 and pin2. The two pins are 12V output. The two pins pin2 and pin3 are 5V output. Please refer to the figure. If the jumper cap is lost, the default output of UBEC is 5V.

3.3. Power indicator: The power indicator is used to display the output status. If it is bright, UBEC has a normal voltage output. If it is not lit, please check if the power input cable is connected and the battery pack is good.

3.4. Turn on/off the output: the switch is set to “ON”, the output is turned on; the “OFF” position is placed, and the output is turned off.

4. Special instructions:

4.1. Although various measures have been taken to reduce electromagnetic interference, the UBEC of the switching regulator mode cannot completely avoid a small amount of electromagnetic interference during operation; to ensure the normal operation of the receiver, please output the output magnetic ring and UBEC master Keep the distance of the board as far as possible (the magnetic ring cannot be superimposed on the main control board), and the entire UBEC should be as far away as possible from the receiver.

4.2, the positive and negative input power can not be reversed, otherwise UBEC will burn out and cannot be repaired.

4.3. When using a small number of anti-interference performance map transmission equipment, it may show that UBEC will interfere with the transmission equipment. If this happens, please reduce the number of windings on the magnetic ring or directly remove it. Magnetic ring. The main reason is that the shielding magnetic ring is used to suppress common mode interference. The more the number of turns, the stronger the suppression ability, but the larger the number of turns, the stronger the distributed capacitance. For high frequency and frequency disturbance, the smaller the distributed capacitance, the better. This distributed capacitance is also related to the material of the magnetic ring. This is why there are very few image transmission devices that may exhibit a magnetic ring and a disturbance.

Package includes:

1pc x UBEC-YL6S8A02




상품결제정보

고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

배송정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,500원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
    - 영업일 기준 2일 이내 미출고 물품은 해외 수입 제품입니다.

교환 및 반품정보

교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
  경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
  다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
  포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
  (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
  따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
  제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
  (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
  (색상 교환, 사이즈 교환 등 포함)

상품사용후기

상품의 사용후기를 적어주세요.

게시물이 없습니다

상품문의하기 모두 보기

상품 Q&A

상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다

상품문의하기 모두 보기


즐겨찾기

이전 제품

  • 상품
  • 상품

다음 제품

TOP